Rubber Blocks Tire Cutting Machine Fix Locking Arms High Pressure

Introduction:

This machine is specially used to cutting wasted Tyre, like large Steel Wire Tyre and Fabric

Tyre. Whose Steel Ring of Tyre has been removed. It can cut kinds of Tyre into your required

standard Rubber pieces, advantageous to the following Grinding process.

Characteristic:

1. The Cutter is made of High Quality Materials, which has advantages of High Mechanical

Strength, outstanding Corrosion Resistance, good Toughness, Long Serving Life Time.

2. It can reset automatically after Cutting, Easy to operate.

3. High Pressure of Hydraulic system with little noise, and can continue working.

Technical parameter

FAQ:

A. On the one hand, Machine quality is the life of enterprise.all our business due to supplying

high quality products and honest management.
On the other hand, the good quality products are the live advertisement in your country, it can

attract more good customers for us. We will absolutely seize this great opportunity to satisfy you

and satisfy your market with perfect products.

Q2. Can you guarantee the capacity as you mentioned ?

A. Definately yes, the grooved two rollers are specially designed to increase the output and

ensure the working efficient.

Q3, are you sure the final rubber powder can be completely clean out of wire steel or nylon ?

A. The final powder purity can reach 99.9%. we have magnetic separator which can separate

the wire steel from the rubber powder.

Advantages of tire recycling machine:

1. Crusher roller speed ratio: Ours is 1: 2.5, while the old type roller speed ratio is 1: 1.38.

2. Roller structure: Our two rollers are both grooved, which increase the friction and then improve

the output, while the old type is one with groove, and the other is smooth.

3. Roller material: The roller is made by Welding wear resistant alloy materials, 5Cr6MnMo. We can

offer you 3 years warranty of the roller. While the old types machine use cast iron to make the

rollers, very easy to break or crack in two .

4. Machine feature: Our machine is energy saving 1/3. For example, producing 1T powder, our

machine electricity consumption is only 150°, while their electricity consumption is about 250- 280°

in making 1T powder.

5. Bearing: Our machine use rolling bearing, there are 8 pieces bearing inside, while the old

machine use the slide bearings ( bush) , which is not as good as ours.

Steps of treating waste tires

First step: push a tire to the tire debeader, then a hydraulic lifting device will lift the tire in order

that the hook can reach the tire. Then the hook works hydraulically pull out the wires from the tire.

Second step: the shredder will shear the tires into 50mm with the help of a running circle sieve.

Sieve size: 50*50mm

Third step: A belt conveyor will convey the shredded tires into the double roll grinder for crumb

rubbers. A screening machine with two outlets: correct size will come out from the down side

outlet; oversized will come out from upside outlet and be conveyed to the grinder again by

another belt conveyor. Repeat this procession; you will get the size you want.

Fourth step: correct size rubbers will come to a screw conveyor, then be conveyed to the

multi-layer magnetic separator. With the ferment magnetic rolls, steels will be removed thoroughly.

Fifth step: after the steels are removed, it may also remain some textiles in the crumb rubbers,

so a fiber separator will be used to separate the textiles from rubbers according to gravity

difference and air flow.

By now, 99.9% purified rubbers will be got. And if you wanna pure rubber powder, just need

the Rubber Granule Superfine Miller, final products as fine rubber powder.